2 props...the top one is a 25P Temp+ I bought here on BBC that was said to not have been worked but must have. The one on bottom is a 26 T+ blue printed by Mark. I am trying to decide whether it is worth the shipping of the 25 to Mark for his opinion. It looks like the 25 has no cup at the tip and might possibly not be of the original diameter anymore. Thoughts??
Resized 25 Temp+ VS Croxton 26 BP Temp+.JPG
2019 721 ProXs 4S 250
2B599739
Did you measure it to see if it still measures 14.5"? It does look smaller that the 26
Don't really know how to measure it.....is there an easy way to?
2019 721 ProXs 4S 250
2B599739
Center of the prop hub to the blade tip X 2 is the diameter of a 3 blade.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Thank you Sir!! I will measure in the morning.Originally Posted by 21XDC
2019 721 ProXs 4S 250
2B599739
When I ran the 25 with all holes plugged it blew out on break over at all levels on the Hydo jack plate so I know it has issues.....The 26 runs fine
2019 721 ProXs 4S 250
2B599739
Yep, looks like the 25 may be 1/8" short so that would mean 1/4" total then....I really hate when folks aren't honest
2019 721 ProXs 4S 250
2B599739
It could mean that it was made right by Mark when he B&B the 26.
My measurement on the 25 comes out to 7&1/8 so X 2 = 14& 1/4....of course it's my first attempt at measuring.....the 26 is about 14 & 1/2 as best I can tell....
2019 721 ProXs 4S 250
2B599739
Tempest plus is 14 5/8 diameter new.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Thanks Mike! Nothing Mark can do with the 25 I don't think. I will take it to Ebay, fully disclose whats up with it, and sell it as a "get you home" prop but nothing more
2019 721 ProXs 4S 250
2B599739
Reply With Quote
.jpg)