-
Member
Scorpion to Fury
I am currently running a Scorpion (9561-151-24) and I am only turning 5200-5300 rpm max on my Yammy Sho 200HP , still breaking it in. I am thinking about going to a 23 pitch Fury to try and get the RPMs up and lil more top end. Does anyone know exactly which diameter 23 Pitch Fury I would need, as I assume the 151 in the Scorpion is 15 inches? I know I will have to get a hub kit.. Any info would be appreciated..
Thanks
Jason Davis, MSgt, USAF, Retired
IF YOUR NOT GETTING HUNG UP, YOUR NOT FISHING WHERE THE FISH ARE!!"
2019 Falcon 195
2019 Yamaha SHO 200 w 23P Fury
Helix 9 DI (Bow)
Helix 9 SI with Mega (Console)
MK Ultrex 80lb
NMEA 2k
-
Moderator
Fury3 is 14in... Fury4 is 14.5in... The Fury4 dont come in 23P.
-
24 scorpion turns like a 26 of most other brands
-
Doubt that rig will turn a 26 Fury.
-
Member
It turns the 24 pitch scorpion now, its what the dealer put on it. It will only turn to 5200-5300 rpm, why I want to run the 23 Fury
Jason Davis, MSgt, USAF, Retired
IF YOUR NOT GETTING HUNG UP, YOUR NOT FISHING WHERE THE FISH ARE!!"
2019 Falcon 195
2019 Yamaha SHO 200 w 23P Fury
Helix 9 DI (Bow)
Helix 9 SI with Mega (Console)
MK Ultrex 80lb
NMEA 2k
-
Moderator
If the scorpion is running raised motor heights like it should be, The fury needs to run about an inch deeper because of it's small diameter.
-
The Scorpion props run about two pitches heavy. Meaning a 24 pitch would be equivalent to a 26 pitch in a standard prop. So if your running a 24 pitch Scorpion now you should probably stick with a 24 fury to get your RPMs up.
-
Moderator
A 24 Fury turns like a 25P prop.
-
Member
My SHO ran well with a Temp+....have you thought about a 24 or 25P Temp+?
2019 721 ProXs 4S 250
2B599739
-
i would swap the 24 scorp in for a 22, which turns likeva 24'' i run a 24 but light hull 78-80 @ 6000. scorp has super lift and fast. turns same as a 26 merc.
-
the big diameter of scorp is a plus.