Does minn Kota make an extension for the stabilizer arm on Ultrex? I have mine maxed out and I’m m about 1-1.5” from being tight. A 2-3” extension would be perfect. I’ve looked and can’t find one.
Does minn Kota make an extension for the stabilizer arm on Ultrex? I have mine maxed out and I’m m about 1-1.5” from being tight. A 2-3” extension would be perfect. I’ve looked and can’t find one.
Did yours just get cut short ? Had to cut 8 inches or so off of mine so it would fit. Gawd that sounded bad
2024 Phoenix 818, Mercury 175 (3B414035) Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s for the TM. Minn Kota 345 PCL charger,
I try to drive as if my 16 year old Grandson is following me
Speak as if he is listening and act as if he is watching
The stabilizer bar is hollow. The hole is perfect size for tapping. Tap about an 1 inch of thread and put in big head bolt to correct length.
Are you sure it was not just cut off to short....if it was just get a new one? Mine must have been 15-16 inches long before cutting.
Bought the Ultrex from a friend of friend. Never thought the stabilizer might have been cut. How long are they from factory?
Yours must of been cut short I had to cut mine I think it comes 21" long.
Must’ve been cut. My guess is 8”
Just took rubber knob off and it’s been cut. Wow a new one is $40-45.
Tapped it like I said above or have piece heil arched (welded) on!
See if guy you bought from or some of your buddies still have piece they cut off.
If you have to spend money for a new one, consider the TH Marine Trol Tamer. More money, but a much better device. No movement at all with it.
https://thmarinesupplies.com/product...tabilizer-lock
2019 BCB Classic
Merc V8 200 4S
You've just purchased a $2000.+ trolling motor from a friend of a friend. I suggest spending the money and get the correct part instead of "jury rigging" the part you have.
John
BBC Sponsor since 2006: (870) 773-3474
Mon - Thrs 8am - 5pm Central
Friday 8am-12pm
Garmin Certified Dealer and Installers: Call us for all your Garmin Electronics needs!
ASC for: Garmin, Lowrance, Minnkota, Humminbird, and Powerpole.
[SIGPIC] http://www.jonestrollingmotor.com
[/SIGPIC]
How long of a piece do you need? I think I still have the other half of mine..
I have to agree with John Jones.
Joefish
2007 Ranger 178DVS
Evinrude ETEC 150
<*)}}}><
Not sure what kind of boat you have but you can move the arm to the other side and have it rest on the top cap if that's something your comfortable with. Then you may have to cut the one you have to fit perfect.