What's a good fan to put under the trailer to dry the carpeted bunks? I use a box fan but looking for something better. I don't really want to change the carpeted bunks for the rubber kind at this point.
What's a good fan to put under the trailer to dry the carpeted bunks? I use a box fan but looking for something better. I don't really want to change the carpeted bunks for the rubber kind at this point.
I use an air mover, they work great. Google "air mover fan" they look like a turbo charger. The one I have has 3 speeds and a constant setting or up to 3 hrs timer. They also have electrical outlets build in to them so you can link several in a row. I use this to dry interior carpet and bunks under the boat. I picked mine up at Canadian Tire on sale for round $60-$70. One of the best things I purchased for the boat next to a good shop vac.
Thanks, I just asked Santa for one
It also helps to crank up the trailer tongue as high as possible. This really speeds drying as the water drains to the rear of the bunks quickly. You’ll see the water start to drip off the rear as soon as you raise the tongue.
2006 Ranger Z20 / 225HP Merc Pro XS
How about a de-humidifier set near or under the boat?
Not my idea. Others here and on YouTube shared. But it works and is easy.
Thanks!
Last edited by WjColdWater; 12-16-2018 at 01:15 PM.
Air movers for carpets when they get flooded work great can use them anywhere.
Just curious, why is it necessary to worry about drying your bunks?
Your hull will get blisters if it stays wet. Eventually they will pop and create some issues.
Heres my idea but I haven't tried it because I have gatorbaks. Take a board and set a skill saw to only cut around 1/8-3/16" deep. Then go cut a bunch of slots on the top side of the board that could channel water toward the low edge. Cut some slots on the low side that would let the water out the bottom. Put some carpet on but leave those bottom slots open to drain. I'm not sure if it would dry faster or not but surely it would let the weight of the boat press the water out of the carpet
I have a 1992 Ranger 391V that I have owned since new and still have. I just this last summer replaced the carpet on my bunks for the first time, only because one bunk got torn. When I had the boat on stands and trailer pulled out I checked the bottom for any irregularities and found none. Maybe I'm lucky, but like I said no blemishes from the bunks whatsoever....
Not sure what year the blistering issue started. But you DONT WANT THEM! Repairing blisters is very expensive and a lot of boats have them. The only way to verify is to have the boat separated from the bunks. Most agree that bunk moisture long term causes them. Choose a system right for you and this could save expensive repairs.
Ranger started putting a barrier coat on the hull to fight against blisters, I think around 2010-2011. Curious if any of the newer rangers have got blisters?
I guess I never realized this was such an issue. My 2003 is spotless on the hull and I’ve never done anything special. Just curious, if you block the boat off the trailer say to be able to wax the hull behind the fenders, don’t you put an extreme amount of pressure on a couple spots of the hull?