I'm trying to take my driver seat off a 2008 Triton TR186, as I bought it with a tear on it. I removed 2 screws from the bottom and found one screw on the left side (as your sitting in seat). Seat tips back and forth and twists side to side, but something is still holding it up. It's a solid seat, does not have small lumbar pad to remove. Any suggestions would be much appreciated.Is the passenger seat the same setup as the drivers?
Have you tried youtube?
2000 TR186
2018 150 Pro XS 4 Stroke
6in jack plate-24" Fury3
i'm not positive, but look at the backrest of the seat.....in the middle, what looks like a pad, try pulling it out....it may be held in with velcro....i know on my 2016 that's the solution....should be a couple screws holding it in....good luck!
Yes the screw or screws that are hardest are around the center of the back. It/they are a pain to deal with. it has been a few years since I removed mine and had Carol at C&O Marine to cover them. Good luck!
Reply With Quote