Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Aug 2016
    Location
    northeast maryland
    Posts
    1,763

    Need help figureing out wires colors for Horn/nav light assembly

    two of my wires came out of the bottom of my horn assembly specifically the nav light portion. the black wire is in the middle but there looks to be a red wire and gray wire which pulled out of the assembly and I dont know where they go was wondering if any one knew which wire goes where or has a picture of one with the wires intact. I was gonna fix it with a soddering kit.

  2. Ranger Boats Moderator jc2bg's Avatar
    Join Date
    Sep 2009
    Location
    Findlay, Ohio
    Posts
    12,932
    #2
    What year and model boat do you have? A wiring diagram has been attached to the underside of the rear compartment for quite a few years. The bilge and battery area. If you have an older boat without the diagram, let us know and someone can probably help.
    John Clark — Findlay, Ohio

  3. Member
    Join Date
    Apr 2018
    Location
    Germantown Wisconsin
    Posts
    1,295
    #3
    You should be able to figure out which is which by using a 12 volt test light, hooking it up and throwing switches/horn button on and off.
    Black is probably ground.

  4. Member
    Join Date
    Aug 2016
    Location
    northeast maryland
    Posts
    1,763
    #4
    Oh yes I forgot about that on the back hatch. I have a 2003 ranger comnache 521vx. Thank you both for helping out.

  5. Member larryhyco's Avatar
    Join Date
    Oct 2011
    Location
    Semora, NC
    Posts
    7,265
    #5
    On my Ranger the black is ground and I have a orange with black coming from my horn switch