-
Linking 2 Echomap Plus Units
Hi guys,
I have two Echomap Plus Units and I would like to connect with the purpose of sharing waypoints and transducers.
Do I need an NMA2000 or is there any cable to link both units (Ethernet)?
Thanks for your support
-
Lowrance/Garmin/GPS Moderator
The ethernet cable.....BUT if you will be adding/installing any version of Panoptix then you will need the ethernet port.....
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
-
What do I need to link Echomap Plus with my Mercury F50 ELPT 4 Stroke?
-
Lowrance/Garmin/GPS Moderator
Here is how i have mine connected to my Merc 200 Pro XS......i installed a MercMonitor Level 1 in the dash and then connected it to the nmea network and of course my unit is connected to the network also......as for your motor, i am not sure but i would think the Mercmonitor or the Mercury gateway that will connect to your nmea network. Either ask on the Mercury forum here or your local dealer.
If you do ask on here they will need your motor serial #....
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS