Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Nov 2016
    Location
    Sumter, SC
    Posts
    235

    2013 115 hp Mercury 4 stroke won’t start

    So I started the boat about 3 weeks ago everything was fine and went to start it this morning and I get nothing.

    i verified the battery kill switch, the switch is in the run position and verified it is in neutral but when I turn the key to the accessory position the tone doesn’t stay on, it comes on for a few seconds then stops then starts on for a shorter period. When I move the key the start position I get nothing. The computer won’t even hit the starter.

    Any ideas?

  2. Mercury 3L/4 Stroke/Verado Moderator EuropeanAM's Avatar
    Join Date
    Apr 2008
    Location
    Greenville, SC (US)
    Posts
    95,073
    #2
    See Fourstroke Forum (just a couple more down the list)- be sure to provide the required info.

    Load test BATTERY and verify connections FIRST.


    Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
    Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
    Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor