I have an older boat, 1999 Triton TX21. I changed the control panel and put in a new fuse box. Now I do not have power to the live well , pump out and recert pumps. I attached a toner to the wire at the panel and I have good tone back to the pump. so the wire is good, it is power to the panel. What do I need to check now.
MESHAW
If you have power to the switch and it still doesn’t work, then you need to make sure you have power through the switch to the pumps.
2020 Caymas CX21 Pro
Mercury 250 Pro XS
Serial# 2B686100
Check the negative side too.
If you have integrity, nothing else matters. If you don't have integrity,
nothing else matters.
Bet your missing the ground wire connection at the battery.
I have checked the ground and still having issues. I also have power to the switches. What else can I check?
If you have power at the panel and the wiring checks out, then you have power at the pump, so you are missing something. Follow the wiring from pump to switch on both halves of the circuit.
If you have integrity, nothing else matters. If you don't have integrity,
nothing else matters.
Make sure it is on manual, not timer.
Reply With Quote