Any one have any good plans for a deck extension for a 90 190?
Any one have any good plans for a deck extension for a 90 190?
I have a used deck lid from a 202. It is the center box lid. Them used them to make a deck lid. i sell it if someone wanted it. I have some pictures on here in one of my threads.
Fishing Texas lakes one at a time
2000 Baltex hull 202 Elite Champion
2016 250 pro
8 inch Hydraulic Jack Plate
tempest 27 work by Steve
Hook sets are fishing reality.
Can you send me some pictures and measurements?
deck lid
Fishing Texas lakes one at a time
2000 Baltex hull 202 Elite Champion
2016 250 pro
8 inch Hydraulic Jack Plate
tempest 27 work by Steve
Hook sets are fishing reality.
Do you have the length and width of this deck lid?
I may be interested in it if Deeredude64 does not want it.
Here are the measurements.
If you own a 202 it the middle lid without the hole.
I made me one back in 95 and once they seen how they were made they pit together a kit.
Fishing Texas lakes one at a time
2000 Baltex hull 202 Elite Champion
2016 250 pro
8 inch Hydraulic Jack Plate
tempest 27 work by Steve
Hook sets are fishing reality.
Originally Posted by bruce'
Thanks but 19” wide isn’t wide enough for my hole. The length is right at 31. Thanks anyways.
I used 3/4 plywood to make several deck extensions. It works great and is cheap to build.
What are your exact measurements?
Height wise is 9-3/4 at the front and 10-3/4 at the rear. 31” long and 25” wide if I remember right. I may have to go out and remeasure tomorrow.
Reply With Quote
