Thrust washer help

[coloblt]

I have a 2018 g2 150 ho, I bought a tempest plus and a hub kit, I cannot get the brass thrust washer off my prop shaft from my raker ho prop. I have tried everything I can think of, whacking it with a rubber mallet, I even have a slide hammer with a jig I built to hook behind the washer. I do not want to break something. Any advice?? Thanks...

[Bassmeister]

Rap it on the flat surface with a metal hammer.

[ChampioNman]

Then coat the prop shaft with some Triple guard grease.

[coloblt]

I got it finally, it took a tiny little bit of heat just on the thrust washer and it light tap and it finally came loose. It will not go back on without a bit or never seize...