-
Thrust washer help
I have a 2018 g2 150 ho, I bought a tempest plus and a hub kit, I cannot get the brass thrust washer off my prop shaft from my raker ho prop. I have tried everything I can think of, whacking it with a rubber mallet, I even have a slide hammer with a jig I built to hook behind the washer. I do not want to break something. Any advice?? Thanks...
-
Sprint Boats Moderator
Rap it on the flat surface with a metal hammer.
-
SC Club Moderator
Then coat the prop shaft with some Triple guard grease.
-
I got it finally, it took a tiny little bit of heat just on the thrust washer and it light tap and it finally came loose. It will not go back on without a bit or never seize...