Thread: trailer winch

Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Dec 2007
    Location
    Georgetown,Il
    Posts
    3,143

    trailer winch

    As I have two messed up shoulders and get cortizone shots every 3 months I needed to look for ways to load boat easily. First I have a river jon rigged with
    a with 25hp restructured for bass fishing so weight is probably only 1500 to 2000 lbs/ I spray the bunks with wd40 about every 3 or 4 trips I can drive the boat up all the way on some ramps others maybe 1 to 2 foot short. I went to Harbor Freight and bought a single handle wench it is so easy to crank this old man can do it left handed without a sweat. life was immediately made simpler. winch rated for 5,000 lbs . $29.00.

  2. Better Lucky Than Good! Casslaw's Avatar
    Join Date
    Jun 2018
    Location
    Tampa, FL
    Posts
    7,035
    #2
    A Fulton F2 or XLT would be my suggestion. I got mine off of amazon for $79 and it pulls my little 18’ Triton with a 90 Etec on with ease. Very well made and simple installation.
    Attached Images Attached Images
    2006 Triton SP-185, 2006 Evinrude Etec 90, PowerTech NRS3, Garmin Echomap Plus 73CV & 93SV

  3. Member
    Join Date
    Apr 2018
    Location
    Germantown Wisconsin
    Posts
    1,295
    #3
    Ditto on the F2....saved my right shoulder and my rebuilt right elbow.

  4. Scraps
    Join Date
    Apr 2007
    Location
    Havertown, PA
    Posts
    9,660
    #4
    Is this a geared winch that can pull a glass boat? I know at some point I'm going to bend and grunt too much and drop a nut. Still perfecting my loading with this new boat.
    2017 Phoenix 819
    2016 200ProXS, s/n 2B359849, Mod 1200P73BD

  5. Member
    Join Date
    Apr 2018
    Location
    Germantown Wisconsin
    Posts
    1,295
    #5
    The F2 is a 2 speed winch.
    In low gear I can crank my 18.5 foot glass Nitro up to the roller without effort.
    Easy Peasy.

  6. Member
    Join Date
    Dec 2007
    Location
    Georgetown,Il
    Posts
    3,143
    #6
    mine is not a crank in the sense it goes all the way around Mine goes forward pull straight back go forward get another bite pulls about 2 to 3 " a pull no strain at all.

  7. Georgia Fishing Reports Moderator
    Join Date
    Jun 2004
    Location
    Springfield, GA
    Posts
    11,748
    #7
    Have an F2 going to put on my new trailer. Looking forward to it!!

  8. Member
    Join Date
    Mar 2008
    Location
    Buchanan TN
    Posts
    5,537
    #8
    F2 comes in 1600-2000 single speed and 3800pds 2 speed