I compress the rig down, fold the baits back over the rig, then use a "Bait Wrap" to hold together. Rapala makes one that has a little hook that I put around the hook keeper on my rod. Really works well, and doesn't over bend the rig wires.
I compress the rig down, fold the baits back over the rig, then use a "Bait Wrap" to hold together. Rapala makes one that has a little hook that I put around the hook keeper on my rod. Really works well, and doesn't over bend the rig wires.
Ranger Boats / Mercury Motors
G Loomis Rods / Shimano Reels
Raymarine / MinnKota Ultrex
Garmin / Live Scope Plus
Pepper Jigs / Robo Worms
Troll Bridge / V-T2 Vents
I cut the bottom off a 32oz Gatorade bottle with a razor. Slide that down your rod, and fit the baits inside. It makes it much easier to work around, both in the locker and on the deckt
this cheapest and best
store them also
The toothbrush holders like you use for travelling work great. Especially the type that screw together. Dirt cheap too.
Thanks to everyone for the ideas and tips. I have some good suggestions to work with now that I didn't know about. Thanks.
----------------------------
The bitterness of poor quality is remembered
long after the sweetness of low price is forgotten - Benjamin Franklin
2013 RANGER RT188 - YAMAHA F115 - ULTREX - LOWRANCE GRAPHS
LOCK-N-HAUL Transom Saver, ALL ABOARD Emergency Ladder
1996 RANGER CHEROKEE - 40 YAMAHA
I'm trying to picture what kind of toothbrush holder you're talking about. The only kind I've ever had just had room for one toothbrush.Originally Posted by Mark Perry
Don't worry Ma'am....
I'm only here for the Bass.
https://m.dickssportinggoods.com/p/h...oaAjBLEALw_wcB
I use something like this. They're ankle wader garters, I got them for trout fishing, I think at bass pro. They were cheap
I use an empty Pringles can
I use these when they're in my rod box or on the deck. Another thing that I found that helps is I slide an O-ring over the head and then pull it down over the wires to keep it folded. I forget the size, probably 3/8 or 1/2" maybe...grabbed them from work.
Big bread loaf twist ties.
Stroker / 250xs
Triton 180 / 175 pro xs
I went down to the tennis court and got one of the containers tennis balls come in works perfect to store them
Any new, updated ideas?
Where are the BIG ones? When are we going?
LOOKING for a Great deal on a Slightly used 20-21' Boat.
Plastic ring from a water bottle cap. Slide it over the rod tip down the line and compress over the rig and hook it to the hook keeper. Saw this on you tube and it works great.
Same here.I use an empty Pringles can
A piece of clear vinyl tubing is all thats needed and its cheap.
O-ring.
Lightning 6
2007 TR-196DC
Lays chip container is great, then I use a little piece of plastic with a slit in it
Reply With Quote