Can the firmware be updated to allow the screen scroll speed based on either GPS sensed speed or manual? Should be pretty easy to implement.
Can the firmware be updated to allow the screen scroll speed based on either GPS sensed speed or manual? Should be pretty easy to implement.
Last edited by BassTracker175; 11-27-2018 at 10:13 PM.
Probably could be updated with software, but since there isn't a "magic" scroll speed, Raymarine allows users to adjust as they need rather than adjusting based on speed.
Your wanting the screen to travel as fast as the boat is moving, because you probably feel like it misssing stuff. That’s not the case. The scroll speed think of it as a printer, it’s the speed that it’s printing the image. All the structures will be there and the images will look better at slower scroll speeds.
I know I get the best images at 60-70 scroll speed.
I dont think any brands have a scroll speed that changes with boat speed.
Check out here: https://www8.garmin.com/manuals/webh...D89E04E47.html
The Auto setting selects a scroll rate to match the boat speed, so targets in the water are drawn with the correct aspect ratio and appear less distorted.