Customline Rotor and Bearing question

[hlewis12]

Is this what I need along with the bearings mentioned in the item description to replace my rotor?

https://www.easternmarine.com/ufp-db...assembly-41038

[WVBullet]

I have a tandem axle BoatMate trailer and that’s the size mine takes. Same tapered spindle, that’s a common bolt pattern, same bearings. I’d say yes, but some of the guys on here with a Customline may key in.

[Bullet 250]

My 2004 had oil filled hubs, I know on my buddy's Rangerhe had to replace the whole thing

[WVBullet]

My 2004 had oil filled hubs, I know on my buddy's Rangerhe had to replace the whole thing

Yes your right about that. Mine is the gold series oil filled. Didn’t know if he wanted oil filled which is better or the grease packed. I was just paying attention to the bearing/spindle sizes

[hlewis12]

I was only planning to go back with the grease packed hubs.

[Bullet 250]

Then W V is correct, I checked with another guy I know and those should be the right ones, and I agree, oil filled hubs are better and easier to maintain