0D254160. Can anybody give me info. as far as year n hp?
0D254160. Can anybody give me info. as far as year n hp?
Sea Ray Laguna 180
Mercury 115
1993 150XR6
Rick
Serial# 0D254160
Model# 1150454ND
MERCURY 150XR6 ELPTO
2.5L- 150HP Model.
DOB: 1/20/93
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Thanks guys. What is normal for compression?
Sea Ray Laguna 180
Mercury 115
110-135 psi, Max variance of 15 psi.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Thanks. I should mention motor has not been run for quite some time. Check was done on cold engine due to not attempting to crank on old fuel, fuel pump, filter , no-ethanol resistant lines and water pump more than likely hard as a rock. Results were 92/90/90/92/90/90. I believe once I do maintenance these will go up. What’s your thoughts?
Sea Ray Laguna 180
Mercury 115
I would be very careful given that information. You really should look at the deal as if it did not have an engine...
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Please explain?
Sea Ray Laguna 180
Mercury 115
Make sure the throttle plates are wide open.
1994 SWIFT boat 200-SDX
1999 Mercury EFI 150
They were not.
Sea Ray Laguna 180
Mercury 115
Be glad to.
-Compression you provided is significantly lower than specifications, test methods not as specified.
-Reasons for cold engine extend to potentially extensive fuel system problems from sitting, and some reconditioning before recommissioning engine.
-Costs of just the above items (even if the engine turns out to be viable) reduce the value of the engine by a very significant portion of it's value as a perfectly good running engine.
Hope this helps...
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Gotcha. I plan to rebuild carbs, replace fuel lines/bulb, fuel filter, rebuild fuel pump, check thermostats, water pump kit, lower unit service n clean/flush fuel tank. Oil injection is removed so nothing to do there. Anything else I should do?
Sea Ray Laguna 180
Mercury 115
Check to see if it still has an idle stabilizer- if so, probably should consider removing that.
Be sure to perform a complete Sync-n-Link when done.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor