Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Nov 2004
    Location
    Bentonville, Arkansas
    Posts
    759

    Will 45 in Fortrex fit on Outlaw?

    Dealer said 45 in bracket is slightly larger than Maxxum bracket but is much smaller than the 52 in bracket. Anyone mount a 45 on an Outlaw? I think it should be fine. Thanks
    Gambler Outlaw 1900 SC
    Mercury Optimax 200 3.0 liter Torquemaster
    Mercury Trophy 25P
    Minn Kota Fortrex 80
    Garmin 106sv Ultra & 93sv UHD


  2. Member
    Join Date
    Feb 2016
    Location
    CHAPPELL NE
    Posts
    5,390
    #2
    I have one on my 209 should be just fine
    ~~1995 Gambler~~

    Mercury 250 ProXS
    Bobs 10" AJ
    Dual Power Poles
    2-HB 1199's HB 1158 HB 597 in dash
    Ultrex 112

    "Runs like a cheetah... with his @$$ on fire"

  3. Member
    Join Date
    Aug 2008
    Location
    Green Cove Springs, FL
    Posts
    2,163
    #3
    I have a 45” Fortrex on my Outlaw. Fits just fine to me!

  4. Member
    Join Date
    Nov 2004
    Location
    Bentonville, Arkansas
    Posts
    759
    #4
    Sounds good. I returned the 52 in. Ordered the 45.
    Gambler Outlaw 1900 SC
    Mercury Optimax 200 3.0 liter Torquemaster
    Mercury Trophy 25P
    Minn Kota Fortrex 80
    Garmin 106sv Ultra & 93sv UHD


  5. Member
    Join Date
    Aug 2008
    Location
    Green Cove Springs, FL
    Posts
    2,163
    #5
    You should be fine with A 45”. If my Trolling motor is coming out of the water even if it’s set on the lowest position, I’m not fishing there too much longer anyway lol

  6. Member
    Join Date
    Apr 2018
    Location
    Georgia
    Posts
    131
    #6
    I have a similar dilemma / question: I currently have a Motorguide Great White with a 45" shaft on my 1993 19'3" Intimidator. I am getting ready to upgrade to an Ultrex. The Motorguide fits perfectly and does not obstruct opening my rod locker on the left side of the boat (I have it mounted at an angle on the bow, not straight down the centerline of the boat). I am debating going with a 52" Ultrex, but I don't want it to block access to my rod locker etc. As expensive as they are, I don't want to order something that I'm not happy with. I really don't fish tournaments anymore so I may not necessarily be fishing water with waves large enough to make a 45" shaft come out of the water....but you never know. Does anyone have any input on the 45" vs the 52" Ultrx mounted on a 19'3" Intmidator?