EMM hose barb

[Double Trouble]

Any body know if the hose barb on the top of the emm from a ficht engine can be replaced the one on my emm is badly corroded.

[Danrude]

There is one on the top and one on the bottom that are plastic and one on the starboard side between the two connectors that is metal, which of these are you talking about?

[Double Trouble]

There is one on the top and one on the bottom that are plastic and one on the starboard side between the two connectors that is metal, which of these are you talking about?

The one on top.

[SEAHORSE]

E-TEC 40 – 300 h.p. EMM water cooling nipple or fitting is serviceable under part number 330272

[Double Trouble]

E-TEC 40 – 300 h.p. EMM water cooling nipple or fitting is serviceable under part number 330272

Thanks SEAHORSE!

[Double Trouble]

E-TEC 40 – 300 h.p. EMM water cooling nipple or fitting is serviceable under part number 330272

I received the nipples they are threaded, the ones on my 2000 ficht are pressed in.It seems that they changed to threaded nipples in 2001.I have to drill and tap the emm to make them fit.

[ChampioNman]

I received the nipples they are threaded, the ones on my 2000 ficht are pressed in.It seems that they changed to threaded nipples in 2001.I have to drill and tap the emm to make them fit.

See, no model number for reference.

[Double Trouble]

Found this on E Nation.Maybe it will help someone else!

https://community.evinrude.com/t5/Ow...ting/m-p/34308

[ChampioNman]

Found this on E Nation.Maybe it will help someone else!

https://community.evinrude.com/t5/Ow...ting/m-p/34308

That Blue Water Bill is one sharp cookie! Thanks for sharing the link.