Results 1 to 8 of 8
  1. 11-11-2018, 02:35 PM #1
    Crankin
    Crankin is offline
    Member
    Join Date
    Jan 2005
    Location
    Albertville, Al
    Posts
    4,719

    Rod locker Stats

    Just curious :

    Is there a stat sheet that shows the longest rod a ranger model rod locker will hold. My 374 v will only hold 7'0' Rods and just a few of them.
    Reply With Quote Reply With Quote
  2. paulrodbender
    paulrodbender is offline
    Member paulrodbender's Avatar
    Join Date
    May 2011
    Location
    Dartmouth, MA
    Posts
    3,502
    #2 11-12-2018, 08:26 AM
    I'm not much help on the sheet but I usually carry about 6 - 7' baitcasters and 2 - 6' 6" spinning rods and could probably carry a couple more rods in my 374V
    Reply With Quote Reply With Quote
  3. patcal19
    patcal19 is offline
    Member
    Join Date
    May 2014
    Location
    Cumming, ga
    Posts
    100
    #3 11-12-2018, 10:19 AM
    If you can't find what you are looking for you might try to run a tape measure up the tubes to see how deep they are
    Reply With Quote Reply With Quote
  4. Crankin
    Crankin is offline
    Member
    Join Date
    Jan 2005
    Location
    Albertville, Al
    Posts
    4,719
    #4 11-12-2018, 04:33 PM
    Well in my 374v I can go as big as 7'0" maybe 7'1" . I'm thinking about upgrading to a different older boat but don't want this pain in the butt that I have now with Rod limitations. So I thought if I could see before hand it might help.
    Reply With Quote Reply With Quote
  5. paulrodbender
    paulrodbender is offline
    Member paulrodbender's Avatar
    Join Date
    May 2011
    Location
    Dartmouth, MA
    Posts
    3,502
    #5 11-13-2018, 01:26 PM
    Catalogs have this info but it will be for that specific year
    Reply With Quote Reply With Quote
  6. paulrodbender
    paulrodbender is offline
    Member paulrodbender's Avatar
    Join Date
    May 2011
    Location
    Dartmouth, MA
    Posts
    3,502
    #6 11-13-2018, 01:32 PM
    Attached Images Attached Images
    Reply With Quote Reply With Quote
  7. KINGHUSS
    KINGHUSS is offline
    Member
    Join Date
    Oct 2018
    Location
    Lake Michigan
    Posts
    6
    #7 11-13-2018, 03:04 PM
    I've heard that there are ways to extend existing lockers by cutting out the foam in the front of the locker. Is this true?
    Reply With Quote Reply With Quote
  8. Blackwoodz
    Blackwoodz is offline
    Member
    Join Date
    Jul 2018
    Location
    Flint Michigan
    Posts
    399
    #8 11-13-2018, 03:33 PM
    Quote Originally Posted by KINGHUSS View Post
    I've heard that there are ways to extend existing lockers by cutting out the foam in the front of the locker. Is this true?
    Most likely you can achieve a few more inches....but be aware this will extend the tip eye past tube and could damage the eye when removing rods. Just something to think about
    1994 SWIFT boat 200-SDX
    1999 Mercury EFI 150
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »