So if I'm reading what you're saying in the last post correctly, the ones that are running last years Humminbird Mega DI (would be a G2n) are not going to be able to use the MinnKota MDI transducer for a down imaging picture????
So if I'm reading what you're saying in the last post correctly, the ones that are running last years Humminbird Mega DI (would be a G2n) are not going to be able to use the MinnKota MDI transducer for a down imaging picture????
BBC Sponsor since 2006: (870) 773-3474
Mon - Thrs 8am - 5pm Central
Friday 8am-12pm
Garmin Certified Dealer and Installers: Call us for all your Garmin Electronics needs!
ASC for: Garmin, Lowrance, Minnkota, Humminbird, and Powerpole.
[SIGPIC] http://www.jonestrollingmotor.com
[/SIGPIC]
Don't know for sure, just extrapolating what was posted on the Humminbird forum when the question was asked about using the new MEGA DI+ transducer with a G2N DI MEGA unit.
Read post #23 and #28 here and see what you think:
http://www.bbcboards.net/showthread.php?t=941325&page=2
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
this is from the Humminbird website software version 1.84 . The latest software update for the Gen2 di mega units
Software support for the new Built-In MEGA DI Transducer [MEGA Capable Models Only] – HELIX units now support Minn Kota trolling motors with Built-In MEGA DI. An appropriate adapter cable must be used
Last edited by ntslam; 11-08-2018 at 06:31 PM.
- For HELIX 9 MEGA G2N, 10 MEGA G2N, and 12 MEGA G2N series units use adapter: MKR-MDI-1 (1852085)
- HW CHIRP Transducer Support [CHIRP Models Only] – Connected Transducer modes now include a High Wide CHIRP Mode, called “HW CHIRP”. This allows MEGA DI and Built-In MEGA DI transducers to be used with 2D models or without DI pinging.
Wonder what the meaning of HW+MDI is for Built-In?
edited: another thought, the + is between HW and MDI instead of after MDI (MDI+).
MDI+ or MSI+ would be the transducers that are not backwards compatible.
Still looks like the built-in is not 83/200 kHz rated for 2D sonar and can be Dual Spectrum 2D only or Dual Spectrum with DI depending on the unit connected.
Last edited by Wayne P.; 11-08-2018 at 07:04 PM.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Wayne P. This is an excerpt that I found with my September MinnKota Newsletter:
The new trolling motors are compatible with Humminbird SOLIX®, second generation HELIX®, and
ONIX models and will be available in the fall of 2018. For more information visit MinnKotaMotors.com.
Built-In MEGA Down Imaging is not backwards compatible to older motors. It must be integrated with the
motor during manufacturing and will require a new adapter cable to the following Helix® G2 series unit
(adapter cables are not required for Solix® or Onix models)
John
BBC Sponsor since 2006: (870) 773-3474
Mon - Thrs 8am - 5pm Central
Friday 8am-12pm
Garmin Certified Dealer and Installers: Call us for all your Garmin Electronics needs!
ASC for: Garmin, Lowrance, Minnkota, Humminbird, and Powerpole.
[SIGPIC] http://www.jonestrollingmotor.com
[/SIGPIC]
I am hearing you will need to purchase a heading sensor separately for the new Mega 360 for the Ultrex. If this is true, why not just add it to the cost and not play games with the pricing. That will be another $150 add-on.
Has anyone heard of this to be true?
Chris Hoffman
Londonderry, NH
2022 SKEETER FXR20 APEX w/ 250hp SHO
1x APEX 13 MSI+, 1x Solix 12 chirp MSI+ G3, 1x Solix 15 chirp MSI+ G3. AS GPS HS, Mega 360 Imaging. MK Ultrex MDI w/ iPilot link, MegaLive with Targetlock and 8’ MK
Raptors and Ionic Lithium Batteries
><((((º>`·.¸¸´¯`·.¸><(((º>`·.¸¸´¯`·.¸><(((º>.·´¯`·. ><((((º>`·.¸¸.·´¯`·...¸><((((º>`·.¸¸. ·´ ¯`·...><(((º>
It does not come with a AS GPS HS antenna.
I am guessing the reason is that if you have a Humminbird and an iPilot LINK Ultrex, you don't need a AS GPS HS since you can use the Minnkota Heading Sensor to mark and display waypoints on the 360 view.
That makes it $150 less for an accessory you don't need.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Will the MK Ultrex MDI work on a HB Helix Mega Chirp GN2 Si unit?
Yes, you just change the Connected Transducer setting to Built-in HW+ MDI.
You won't have Side Imaging.
https://www.minnkotamotors.com/suppo...n-MEGA-imaging
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL