Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    May 2012
    Location
    Somerset, Ky
    Posts
    1,413

    17 721 auto bilge stuck on

    As above- I unhooked from battery but didn’t have time to investigate as I’m out of town now, is this something I can clean ( float valve) or should I go ahead and order new pump and valve? Thanks

  2. Member
    Join Date
    Oct 2017
    Location
    Missouri
    Posts
    161
    #2
    Mine did the same thing. I had a hose in
    in the bilge area that was resting on the knob on the outside
    of the pump that the float pivots on and was putting enough force on it
    that wouldn't allow the float to return back down. I just had to zip tie the hose away from the bilge pump.

  3. Member
    Join Date
    Dec 2011
    Location
    McGregor, ia
    Posts
    1,105
    #3
    I found the cut off tip of a caulking tube in mine. They must have dropped it in there during the build process. Easy fix!
    Pool 10

  4. Member
    Join Date
    May 2012
    Location
    Somerset, Ky
    Posts
    1,413
    #4
    Great thanks

  5. Lowrance/Garmin/GPS Moderator fishin couillon's Avatar
    Join Date
    Jun 2004
    Location
    Pineville, La
    Posts
    33,096
    #5
    THey are pretty easy to remove from the base so will help getting the trash out.....
    YOU are not entitled to what I have earned!!!!!

    2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS