-
919 cover pic
OK so I think I am good, but does anyone have a good picture on how the Phoenix cover straps hook together at the rear. I know it sounds dumb but I was left scratching me head. I ended up hooking the snaps together under the JP but wondered if that's correct. LOL I love pics if you have them to share.
Thx and appreciations
Risen From The Ashes!!
-
Lowrance/Garmin/GPS Moderator
There should be 2 "D" rings on the back of jack plate that they hook onto.......assuming you have a Z-Lock jp......
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
-
The "d" rings should be there on the sides of the jack plate.
-
I don't have the D-Rings either but I have an Atlas with Talons where i believe they put the D-Rings, I connect the snaps together too!
-
OK I have an Atlas and no D rings but sounds like my thinking was sound to connect the snaps together. LOL it was certainly interesting putting it on first time I ended up pulling one of the buckles out and had to thread it back in. Now that I have it figured out I really like the cover compared to the other brand boats. It sits tight and even fits around the trolling motor perfect.
Thx again
Risen From The Ashes!!
-
Lowrance/Garmin/GPS Moderator
-
BBC SPONSOR / PHOENIX MOD
-
Thx everyone, yup Talon brackets definitely in the way so there removed. Will go with plan B and just connect the snaps together.
Risen From The Ashes!!
-
You can hook them in one of the holes of the talon brackets also. Running them under could end up cutting them on a sharp edge