Detwiler hyd jackplate issue

[JINXBASS]

I have a 2012 puma with a detwiler jackplate and binds when it goes down. Meaning when let it down the rod goes down but the motor stays up. I have to wiggle the motor to get it to go down. I thought maybe build up on the guide tubes, so I cleaned them and applied some wd 40. A little help but still does not work. I do notice that when I hit the jackplate switch down the motor cocks just a little. So to me it is getting bound up. So is it just worn out, or toast? Please give me some ideas. Thanks

[castforcash]

There are zerk fittings on the cylinders, try and add some grease and see if that helps.

[JINXBASS]

There are zerk fittings on the cylinders, try and add some grease and see if that helps.

thank you sir. I looked but did not see any. I will check better.

[JINXBASS]

yep I am an id 10 t!!! They are there in plain sight. Thanks guys

[Eli]

It took me many tries to find the zerk fittings on mine. Had to look through the opening in the side of the plate to access them. Hope it helps.

[JINXBASS]

I got her greased up and all is well. Thanks guys