Stays at 2.5. Can blow a puff of air into it from my compressor & it will go to 5. Gauge is broken into 2.5 increments, btw. I assume the gauge is no good. Any ideas. Will any gauge work or does it have to be Yamaha or SHO. I would think any gauge would work but nowadays I don't know anymore.
Thanks
I would think any pressure type gauge would work. Probably find a used Yamaha one on eBay
2024 Phoenix 818, Mercury 175 (3B414035) Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s for the TM. Minn Kota 345 PCL charger,
Is the gauge connected by tubing to the engine or is it run off of a transducer. A lot of boat manufacturers use the "electric" transducer. Personally the transducer version is junk. Mine was off from day one but worked. I installed a manual psi gauge.
2014 Phoenix 721XP, 250 SHO, Bobs Action Jack, Dual Blades, 112 Ultrex, 2019 Lariat FX4 F150 Supercrew 4x4
vacuum line to the engine & two terminals for the light ( blue & black). Seen some that have a socket for the light.
Any analog water pressure gauge will work. The mercury gauges are a good choice and come as a "kit" that includes new hose, fittings, etc.
BassCat '17 Sabre DC FTD Advantage Elite
175 Yamaha SHO
MK Fortrex 80
That's correct Midnight Rider. My problem was trying to get one to match my Triton gauges. No such luck. Did come close with the Faria gauge, black face w/ SS bezel.
Reply With Quote