How has people been doing this? Where are you guys mounting the box? That’s my main concern, I don’t think the cable will reach anywhere to mount it..
How has people been doing this? Where are you guys mounting the box? That’s my main concern, I don’t think the cable will reach anywhere to mount it..
They came out with an extension cable.....
https://buy.garmin.com/en-US/US/p/643003
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
They do offer a 10 foot extension cable for the LiveScope Transducer. This cable is very large and will be difficult to run in your Ranger. I use Weld Mount fasteners to secure the LiveScope System under the bow panel. You can use their basic zip tie holders epoxied to the fiberglass then secure the Module with zip ties. Another and better option is the Stainless Steel studs they offer. Check it out weldmountsystems.com! Call me if you have any questions! Best of luck.
Jason Cassell
BassBoatElectronics.com
1-800-931-9926
Chad Phillips
BassBoatElectronics.com
Ultra Marine Service - Mercury Outboard sales and service
1-800-931-9926
1230 Topside Rd. Louisville, TN 37777
Showroom & Office Hours M-F 8a-5p
I have yet to install my livescope on my boat. One thing I noticed, the transducer cable, that connects to the black box, holy crap.... that is a huge plug. It will require me to drill a hole on the boat about the size of a quarter.
"There are 3 types of people, those who can count, and those who can't"
Size of a quarter isn't that big.....or I'm used to making holes that big before....
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
It is actually bigger than a quarter. But yes, very large hole.
"There are 3 types of people, those who can count, and those who can't"
1 1/4" will get the job done
I ended up cutting one of my rod holder sleeves off under the bow panel. I ran all my cables into the center compartment and mounted the black box on the floor all the way to the front of compartment.