Results 1 to 18 of 18
  1. #1
    Member
    Join Date
    Sep 2009
    Location
    jacksonville
    Posts
    1,143

    Wooden Bunk Replacing

    I have the wood and the carpet to redo my trailer bunks but what sealant for the wood before I cover it and rust preventer on the trailer should I use?

  2. Member
    Join Date
    Mar 2012
    Location
    Pelham, GA
    Posts
    2,003
    #2
    What kind of wood did you buy?
    Mercury 2002 200hp Carbed Saltwater
    OT566776
    2002 Cape Horn 22' Bay

  3. Member
    Join Date
    Sep 2009
    Location
    jacksonville
    Posts
    1,143
    #3
    Great question!!
    it was given to me by my neighbor. It’s a hard wood but I’d have to ask?
    are there different sealants that I should use based off certain woods?

  4. Member crank68's Avatar
    Join Date
    Mar 2011
    Location
    Kenly, NC
    Posts
    17,403
    #4
    People have different opinions when it comes to bunk board material. Whatever you choose use stainless hardware and install GatorBacks instead if carpets.
    BULLET 20 XRD/250 Merc Sport XS
    www.ncboatguy.com

  5. Member fishnfireman's Avatar
    Join Date
    Apr 2005
    Location
    Amarillo
    Posts
    12,432
    #5
    Ditto on the stainless steel and if you use carpet use stainless or monel staples.
    I would recommend a search about using gatorback or any other non carpet bunk cover. Many debates - if I have my info correctly there has only been one major boat co to use them and they are now back to carpet.

  6. Member
    Join Date
    Sep 2009
    Location
    jacksonville
    Posts
    1,143
    #6
    could not find out what type of wood it is.
    so i am back to square one..Anyone use flexseal on your bulks? Just an idea he had
    but I did look up the gatorbak.. and I am looking at my trailer

    The length of my boards are 5'8" and 10'1" and they are 1 3/4 x 5 7/8 with and thickness doesn't seem right does it?

  7. Member
    Join Date
    Mar 2012
    Location
    Pelham, GA
    Posts
    2,003
    #7
    The reason I asked about the wood is the fasteners may need to be different if you are using pressure treated lumber, if not then any stainless or galvanized bolts will be good with monel staples for the carpet.
    Mercury 2002 200hp Carbed Saltwater
    OT566776
    2002 Cape Horn 22' Bay

  8. Member ifishinxs's Avatar
    Join Date
    Jul 2015
    Location
    Southern Utah
    Posts
    6,387
    #8
    Pressure treated 2x4’s and stainless hardware and your set. Bass cat carpet is what I used. Make sure to leave enough space under the bunk so water will drain off. Use an electric or Air powered stapler If possible. Makes the install a lot easier. Spray on contact cement helps hold things in place as well.
    2024 Phoenix 818, Mercury 175. Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s for the TM. Minn Kota 345 PCL charger,

  9. Member
    Join Date
    Jan 2010
    Location
    Indiana
    Posts
    7,669
    #9
    Wood sealant I would say 2 coats of Spar Varnish. BUT you can not use that or poly urethane on treated wood. You will have a chemical reaction and both products will turn crusty and peel off. So your best bet would be 2 coats of a Solid Color, Oil Based deck stain. This way the wood will absorb it and not peel off with any moisture that might be in the wood.
    That or a fiberglass resin thinned down.

  10. Member TX721's Avatar
    Join Date
    Apr 2012
    Location
    Schertz, Texas
    Posts
    2,420
    #10
    Use cedar or cypress for your bunk boards...no need to seal either. Staninless steel lag bolts and staples. I went with Gatorbaks

  11. Member
    Join Date
    Mar 2012
    Location
    Pelham, GA
    Posts
    2,003
    #11
    I second the cedar bunks, that’s what is on my 2002 trailer and they are still in good shape, however the galvanized hardware has seen better days. Will be replacing the hardware soon. Mine is used in saltwater mostly.
    Mercury 2002 200hp Carbed Saltwater
    OT566776
    2002 Cape Horn 22' Bay

  12. Member
    Join Date
    Aug 2016
    Location
    Mount Dora FL
    Posts
    374
    #12
    I use untreated southern yellow pine. Cedar is not strong enough and is weak.
    2002 Tr-19 200 ox66

  13. Scraps
    Join Date
    Apr 2007
    Location
    Havertown, PA
    Posts
    9,572
    #13
    Shortly after purchase I changed to GatorBaks. Picked out some good looking pressure treated 2x4s and then coated them with black paint to not show bare wood. I let them dry really good before putting the gatorbaks on the boards. I used galvanized hex head deck hardware cuzz I couldn't find a good stainless fastener to use.
    2017 Phoenix 819
    2016 200ProXS, s/n 2B359849, Mod 1200P73BD

  14. Member
    Join Date
    Mar 2012
    Location
    Pelham, GA
    Posts
    2,003
    #14
    Quote Originally Posted by Triton420 View Post
    I use untreated southern yellow pine. Cedar is not strong enough and is weak.
    My cedar bunks are large, about 6” wide and 10” tall for my bay boat, which probably weighs 4000+lbs.
    Mercury 2002 200hp Carbed Saltwater
    OT566776
    2002 Cape Horn 22' Bay

  15. Member 06 SB's Avatar
    Join Date
    Feb 2012
    Location
    West Point Lake, GA
    Posts
    10,963
    #15
    Cypress is your best bet. Carpet or Gatorbacks, your choice.

    USN Retired
    2020 Basscat Caracal
    2020 Mercury 225 ProXS 4s



  16. Member fishnfireman's Avatar
    Join Date
    Apr 2005
    Location
    Amarillo
    Posts
    12,432
    #16
    This guy used (red) wood...
    Attached Images Attached Images

  17. mikesxpress
    Guest
    #17
    KDAT boards if you can find them. Kiln Dried After Treatment. Not going to be at Lowe's/HD. These boards are dry and not near as heavy as normal pressure treated lumber and also allot better quality with minimal knots.

  18. Member
    Join Date
    Jan 2012
    Location
    Benoni RSA
    Posts
    95
    #18
    New Concept Boat Bunks to be on marked soon.
    Made in USA.
    Will keep you posted.