-
HPDI 250 Power Load Problem
Help please,
Motor bogs down under load no load runs but there is a miss fire.
All Filters replaced. Injectors Serviced. Compression same on all banks.
Found Ohm resistance on all coils the same. Removed plug wire one at time and pluged with a spark plug. All fire same exept no3
No 3 Plug Wire can't be touched # losing spark? Did not run it in dark but will to see if i can see a leakage.
Could it be a bad coil? Plug wire? Plug wire casted / mould with coil?
Is it a common problem?
Should all six be replaced?
Thanks in Advance
Blackie
-
Member
Swap parts one by one to another cylinder