Page 6 of 6 FirstFirst ... 456
Results 101 to 114 of 114
  1. Member
    Join Date
    Dec 2019
    Location
    Rice, MN
    Posts
    358
    #101
    Quote Originally Posted by gr8basser View Post
    16" of setback did it for me. Bow flew high and my old 2001 X19 ran in the mid 70's! (At least put a 12" plate on her)
    WOW! 16" of setback?? Sheesh!!! I will see what we can come up with... Thanks man!

  2. Member
    Join Date
    Dec 2019
    Location
    Rice, MN
    Posts
    358
    #102
    Tried adding 2" spacers and the hotfoot. Spacers seemed to help a bit. Might still have to work on a 10" plate. Still need to try a 25" 4 blade prop. Still running 6400 Rpm with the scorpion 23" three blade... 4" PTP, 57 mph.

  3. Member
    Join Date
    Aug 2011
    Location
    Sorrento, Louisiana
    Posts
    237
    #103
    2020 X21 Pro
    200hp SHO flashed to 300hp
    12" hydraulic jackplate
    minnkota terrova i-pilot
    27p tempest plus prop
    6,000 rpms top end
    Speed: 78mph so far
    Last edited by jgleu; 09-19-2022 at 01:26 PM.

  4. Member
    Join Date
    Mar 2008
    Location
    Vancleave
    Posts
    469
    #104
    2021 X 18 Pro
    2020 Yamaha F150
    6" manual Jack Plate
    3 7/8" PTP
    5800 rpms
    Power Tech OFX 15 1/4 23P
    Top speed so far 58.4 with 3/4 tank of gas and most of what I normally carry. Still in the break in period with just over 4 hours on the motor

  5. Member
    Join Date
    Jan 2021
    Location
    texas
    Posts
    1
    #105
    1996 H51
    1992 Yamaha 85HP
    Yamaha 21K prop

    Just getting this boat setup and trying to determine best motor height for planing and speed. (considering 2nd hole from top). Will be running this boat in a river and need to be able to make sharp turns on plane.

  6. Member
    Join Date
    Oct 2009
    Location
    Smyrna
    Posts
    4
    #106
    I have some questions about setup. Where and how can I post them here?

  7. Member
    Join Date
    Dec 2005
    Location
    Shelby, NC
    Posts
    60
    #107
    I have a 2015 XP200 w/Yamaha 115. Came stock with a Jack Plate and Power Tech Stainless. 2 1/2 inches below... Only seeing 38 gps @ 5600 rpms on a good day. Was expecting low to mid 40s at least. Any prop suggestions to achieve max performance?

  8. Member
    Join Date
    Jul 2021
    Location
    Thibodaux, Louisiana
    Posts
    1
    #108
    Hey bud, did you ever figure your set up out? I just bought a 2009 X19 with 175 HPDI that came with a 4 blade Power Tech with a 23 pitch and I'm getting 61mph @ 6100rpms.. I want to try a 24 TXP and a 25 TXP see which will do me better,

  9. Member
    Join Date
    Sep 2020
    Location
    Orlando, FL
    Posts
    8
    #109
    2021 X19
    200 SHO
    Bravo FS 25P
    SeaStar 12" hydraulic jackplate
    8ft blades
    3 27 series AGMs
    Spare T2 Prop
    9 and 10 inch Helix, Garmin 106SV
    80lb Ultrex, 360 imaging
    Full tank, full well 69MPH by myself, 65-66 with a Co.

  10. Member
    Join Date
    Sep 2021
    Location
    Boerne, TX
    Posts
    14
    #110
    2022 X21
    250 sho
    atlas 8”
    charcoal and green sea deck
    dual console
    Custom dual helix 9 console precision sonar
    custom dual 12” helix at bow precision sonar
    360 mega
    dual 10’ raptors
    80# ultrex
    sound bar
    25 power Tech 66mph 5700rpm by myself
    (and testing a worked T1 23p to. 24p)
    not happy with speed going to call Mark and see what kind of magic he can do for me!!
    Attached Images Attached Images
    Last edited by KWx21; 11-23-2021 at 11:20 PM.
    X21 DC 2022 250sho (not the new one)
    dual 10’ raptors
    8”atlas jack plate
    Ultrex 80lbs
    Precision sonar dual console helix 9”
    Precision sonar dual stack bow helix 12”
    mega 360
    6” trailer frame

  11. Member
    Join Date
    Apr 2022
    Location
    Lafayette, La.
    Posts
    133
    #111
    2003 18' H56
    2003 Optimax 135 - 25" shaft
    6" Pro Hi-jacker manual jack plate
    Hot foot
    4" ptp
    Current Spitfire 14" 17P four blade - in process of trying props
    Current 38 mph gps wot at 5500 rpms trimmed out a little until porpoising starts.
    Last edited by MDean89; 07-25-2022 at 01:52 PM.
    2003 18' Xpress H56, 2022 Tohatsu MFS140 / Serial #071184BB

  12. Member
    Join Date
    Nov 2004
    Location
    HEALDSBURG Ca.
    Posts
    4,621
    #112
    Quote Originally Posted by Wackoman View Post
    I have some questions about setup. Where and how can I post them here?
    Have X19 2004 motor blew no 200 hp available just got 150 merc. Pro Xs any idea what prop. And setting I should begin with? Don’t have any idea if I am doing this correctly.
    BILLY. 1995 202DCX ELITE TEAM FATBOY
    & 2000 tracker PT185
    2015 Fish count
    Days on the Water =5.
    Big fish 1-5.5
    Big fish 2-5.00000
    Big fish 3-4.0
    Big fish 4-3.0smallmouth
    Big fish 5-@2.50

  13. Member
    Join Date
    Aug 2009
    Location
    TABLE ROCK / BRANSON MO.
    Posts
    101
    #113
    THE 150 WOULD BE THE WAY TO GO. I HAVE A 150 YAMAHA ON MY DECK BOAT AND IT DOES NOT BURN HALF THE GAS

  14. Member
    Join Date
    Feb 2023
    Location
    Louisville, KY
    Posts
    2
    #114

    USA

    I have a 2011 h17 with a 2011 Yamaha 70hp, 6" bob's hydraulic plate, 80# Ultrex TM, 3 agm battery setup, and currently a powertech 18p. Seeing around 37-38mph at ~6300rpms.

    Questions
    1. What props should I try to get better top end speed with the 70hp?
    2. Considering repowering to a 90hp or 115hp SHO (boat is rated for 115hp)- what is the better option for this rig?
    3. Talon or Power Pole? Would I compromise performance if I repowered to a larger hp and added 1 talon or 1 powerpole (main concern is weight since these rigs seem to be quite weight sensitive)?

    Xpress 2023.jpg

    Thanks in advance!
    Last edited by landryb; 11-08-2023 at 11:38 PM.

Page 6 of 6 FirstFirst ... 456

Similar Threads

  1. Xpress X17
    By c g p in forum Xpress Boats
    Replies: 17
    Last Post: 09-02-2019, 06:41 PM
  2. xpress h18 ?
    By mswings in forum Xpress Boats
    Replies: 6
    Last Post: 03-23-2012, 07:54 AM
  3. '06 xpress
    By jguin in forum Bass Boat Setups
    Replies: 2
    Last Post: 02-08-2012, 05:15 PM
  4. 17' xpress
    By chucktx in forum Xpress Boats
    Replies: 14
    Last Post: 11-14-2011, 06:17 PM
  5. My new to me Xpress...
    By mikemac10 in forum Xpress Boats
    Replies: 6
    Last Post: 10-07-2011, 07:53 PM