Page 3 of 6 FirstFirst 12345 ... LastLast
Results 41 to 60 of 114
  1. Member
    Join Date
    Aug 2014
    Location
    St.Gabriel Louisiana
    Posts
    2
    #41
    2014 x 19 tournament pak . 175 yamaha v max hpdi , 6 " jack plate / 3 3/4 " below the pad only running 58 mph @ 6000 rpm ! I need help

  2. Member
    Join Date
    Mar 2009
    Location
    Victoria, Tx
    Posts
    1,608
    #42
    Quote Originally Posted by cmd123 View Post
    2014 x 19 tournament pak . 175 yamaha v max hpdi , 6 " jack plate / 3 3/4 " below the pad only running 58 mph @ 6000 rpm ! I need help
    What prop are you running?

  3. Member
    Join Date
    Aug 2014
    Location
    St.Gabriel Louisiana
    Posts
    2
    #43
    its a powertech ofx 21 pitch that come on the boat . just put a tpx 23 pitch running 61 @5400 , still playing with the jack plate

  4. Member MIKER2702's Avatar
    Join Date
    Jun 2004
    Location
    maryville
    Posts
    2,157
    #44
    Quote Originally Posted by cmd123 View Post
    its a powertech ofx 21 pitch that come on the boat . just put a tpx 23 pitch running 61 @5400 , still playing with the jack plate
    id say your fairly close might see 63-64. probably need more setback.

  5. Member
    Join Date
    Nov 2006
    Location
    Baton Rouge, LA
    Posts
    43
    #45

    Thumbs Up

    New to the Xpress family (Xpress Spanky encouraged me to not be shy after I PM'd him) so here goes! I just bought my Xpress H56 last week - and haven't been out except the water test the day I bought it. It's an '04 H56 with a Yamaha 115 2 stroke and an 6 inch manual jack plate. We easily ran mid 40's on the GPS with nice hole shot. I was too excited to take notes of the actual RPMs. Currently running a 17" pitch Honda prop that the previous owner replaced the Power Tech 19" with (still have as a spare). Xpress Spanky informs me that with a 21" I may see better top end, but like I said - I haven't gotten out since purchase date. I'll post more as I "tinker". Excited to get her out!!

    Open to suggestions!


  6. Member
    Join Date
    Sep 2014
    Location
    Arkansas
    Posts
    36
    #46
    Quote Originally Posted by coreybab View Post
    H18 bass with ETEC 135 H.O. 10" jackplate. Boat is on order so I dont know which prop to go with yet. Any ideas
    that's the exact rig I'm wanting to buy, do you have pics? and what speed are you getting out of it?

  7. Member
    Join Date
    Apr 2015
    Location
    minnesota
    Posts
    119
    #47
    2015 x21, 2015 Suzuki 250ss, 112# Fortex, 10" Atlas Hydraulic, Dual Red Power Pole Blades. Still in break in but have seen 67 mph at 5600-5800 rpms, dealer recommended powertech 14.5 x 28p prop but not seein performance debating going to a 16" prop to capitalize on the zukes high gear ratio. anyone running a zuke on xpress

  8. Member
    Join Date
    Feb 2012
    Location
    cottondale
    Posts
    15
    #48
    2015 Xpress H-22 Bay
    2015 Yamaha F200LB
    6” hyd. Jackplate
    23” powertech
    52MPH (gps) @ only 5150 rpm’s
    Boat has a good hole shot, but can’t get any more RPM’s out of it. I believe I need to go down a size or two in props. I purchased a Yamaha four blade 20. I will post as soon as I get time to run it.
    ANY suggestions welcome!!!



  9. Member
    Join Date
    May 2015
    Location
    Lawton, OK
    Posts
    29
    #49
    I have the same problem with mine. The boat shop told me that xpress would send me the right prop, so I guess they need to lay off the hooch up there.

  10. Member seapickle's Avatar
    Join Date
    Feb 2013
    Location
    Thibodaux, LA
    Posts
    692
    #50
    I wouldn't put any faith in Xpress on sending the right prop

  11. Member
    Join Date
    May 2015
    Location
    Lawton, OK
    Posts
    29
    #51
    Turns out that xpress has had some issues with the guys setting up the throttle cables. Most likely our problem is the cables need adjusting. Taking mine in tomorrow, having throttle cables adjusted and a JP installed. I'd bet jguin is having the same issue

  12. Member
    Join Date
    Feb 2012
    Location
    cottondale
    Posts
    15
    #52
    I was told to check my throttle cables... everything looks like its opening all the way. I ill take it by the dealer tomorrow o verify. I was told by my dealer that xpress has been putting too big of props on the h-22 bay. I just bought a four blade prop will be able to run the boat in a few hours. I will post the results..

  13. Member seapickle's Avatar
    Join Date
    Feb 2013
    Location
    Thibodaux, LA
    Posts
    692
    #53
    what 4 blade prop? there are many different 4 blades and they are all not the same...

  14. Member
    Join Date
    Feb 2012
    Location
    cottondale
    Posts
    15
    #54
    It's a yamaha 13 3/4 x 20.. didn't get good

    what powertech prop would you all recommend for my h-22 bay.

  15. Member seapickle's Avatar
    Join Date
    Feb 2013
    Location
    Thibodaux, LA
    Posts
    692
    #55
    the ONLY one I'd run is a powertec TRO4 which is their copy of a real trophy. I run a trophy and Yamaha pro series 4 blade. If you want 3 blade, also try a pro series 3 blade - I ran one of those but liked the 4 blade better on my set up.
    What is your prop to pad height? I'd test all these props starting at 3.5" below pad and go up/down from there. My boat likes 3.75-3.5" below until I'm wide open then is likes up to 3.25"ish
    Last edited by seapickle; 05-08-2015 at 05:23 PM.

  16. Member seapickle's Avatar
    Join Date
    Feb 2013
    Location
    Thibodaux, LA
    Posts
    692
    #56
    jguin - read this thread http://www.bbcboards.net/xpress-boat...pest-fury.html I don't know why you are stuck on powertec. read around on the Xpress threads - no one likes the way they run on these hulls. save yourself the headache and time and try props everyone is getting success with.

  17. Member
    Join Date
    Feb 2012
    Location
    cottondale
    Posts
    15
    #57
    My boat came with powertec, and they will exchange. So if I can find something they offer that will give me "ok" performance I will use it as a spare.

  18. Member seapickle's Avatar
    Join Date
    Feb 2013
    Location
    Thibodaux, LA
    Posts
    692
    #58
    tro4 will be the only powertec worth it. I tried my dads powertec 4 blade (I forget the letters but it wasn't a tro4) and it did not do well at all. I was told by powertec that the 3 blade that came with it was running perfectly and I won't get any better....I'm running 5 mph faster than their "perfect" prop. I sold mine ptec online to offset the cost of a new prop

  19. Member
    Join Date
    May 2015
    Location
    Arkansas
    Posts
    1
    #59
    Quote Originally Posted by seapickle View Post
    I wouldn't put any faith in Xpress on sending the right prop
    I wouldn't expect much from xpress except a boat rushed out the door. Even tho it take 8+ weeks.

    Wires/hoses in in back were a tangled mess. Charger laying unmounted in bilge. No drain hose on 2 compartments in back. Holes in decks for complements out of square. Many lids hammered for clearance issues. Vent for steering pump was below helm. Transducer too low (sprayed water all over cowling). transducer wire pinched under oil tank bracket. no beep when key on (may be normal haven't investigated). removed everything expect fuel tank and correct most of this. Also many tie clippings and metal shavings. It all functioned but should have been cleaner.

    There are many good things about the boat too. Hull performs well. Seats comfortable. Nice live well. And much more.


    Just got my 2015 h18 pro with new 12/12 produced Yamaha 150hpdi w/6" man jack plate. At hour 3 in break in I've got 54.8 on gps. 5600 rpm 5-1/16" below pad. ?? Powertec (can't find pitch haven't had it off tho).edit: powertec ofx3 23 pitch
    Last edited by Jacksl; 06-01-2015 at 01:51 AM. Reason: found info

  20. Member
    Join Date
    Feb 2012
    Location
    cottondale
    Posts
    15
    #60
    thanks,

Page 3 of 6 FirstFirst 12345 ... LastLast

Similar Threads

  1. Xpress X17
    By c g p in forum Xpress Boats
    Replies: 17
    Last Post: 09-02-2019, 06:41 PM
  2. xpress h18 ?
    By mswings in forum Xpress Boats
    Replies: 6
    Last Post: 03-23-2012, 07:54 AM
  3. '06 xpress
    By jguin in forum Bass Boat Setups
    Replies: 2
    Last Post: 02-08-2012, 05:15 PM
  4. 17' xpress
    By chucktx in forum Xpress Boats
    Replies: 14
    Last Post: 11-14-2011, 06:17 PM
  5. My new to me Xpress...
    By mikemac10 in forum Xpress Boats
    Replies: 6
    Last Post: 10-07-2011, 07:53 PM