bobby we may have to do an xpress tx with all these xpress guys in the thibodaux area.
bobby we may have to do an xpress tx with all these xpress guys in the thibodaux area.
__________________________________________________ ____________
"You only live once.......but if you do it right......once is enough!"
Danny, great job. I have a 2010 XPRESS 18' and I was wondering how you configured the lure holders in your picture along with the rod holders. Would luv to build something similiar. Thanks,
Chris Shipp
2010 XPRESS H18 w/150hp Yamaha V150TLR
Retired Navy (1988-2010)
Here are some things we have done to our rig over the years.
added the SI ducer between the jackplate
stainless steel plating from 18 wheeler mud flaps
rod holder
rod holder
aluminum plate
aluminum glove box
aluminum dash plating
aluminum bracket for transducer switch and bracket for 797SI
Xpress 21 - 200 Optimax
Found a good use for an extra Rod-Saver (short)
My Transducer Saver
Troll-Eze
KeelShield
Spare Tire Mount w/Locking Lugs
Reversed Livewell Doors / Bluewater LED
Modified by MrTotty at 1:13 PM 7/10/2011
I know it's not the fanciest storage system, but it works good.
Ross
2010 Xpress HD 20SCA
2010 Yamaha 150 HPDI
You do warehousing for BPS? I think it looks great.
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by MrTotty »</td></tr><tr><td class="quote">You do warehousing for BPS? I think it looks great.</td></tr></table>
Thanks, but I really think that Xpress should make aluminum boxes of different sizes that someone could buy as an accessory.
Ross
2010 Xpress HD 20SCA
2010 Yamaha 150 HPDI
I can assure you of one thing, they would want way to much for them. I'm sure you could have some built at a welding shop for about half.
I agree Chris, they would want too much and it probably wouldn't be just like you wanted it. It probably would be cheaper to have someone weld up a box that you design. Then you would hopefully have something that fit your particular needs.
I must say that each of you did a great job of making your boat "more livable". Thanks for the ideas.
buddy
Hey Rooster what kind of performance do you get with your 150 on the hd20. Do you have hydraulic steering and what does your coast guard sticker say for max hp?
i wanna say i have gotten alot of great ideas. im really digging the lights. especially in the livewell. my sea pro has them and when i get the new xpress i gotta do that. im glad to know im not the only one that suffers from boat "ocd" and tinkering....
365i.jpg
365i that came with boat installed upfront
Built In Storage.jpg
Built-in tackle storage
Radio.jpg
Fusion Radio with custom wood mount
Passanger Speaker.jpg
component speakers under console so didn't have to cut hull
Gauges.jpg
Added matching trim and water pressure gauge
Last edited by Trent_B; 02-25-2013 at 07:21 PM.
Drviver Consule.jpg
wired remote and custom aluminum lowrance mount w/ HDS 7 Touch
Recir Pump.jpg
Recirculating Pump ans LED Lights
PP Pump.jpg
PP Pump and cleaned up wiring from factory
Bildge.jpg
Float Switch and rewiring
Transducer.jpg
Ducer on JP
Last edited by Trent_B; 02-25-2013 at 07:28 PM.
Here are a few customized features I added to my H51:
photo 2.jpg
Deck extension with step up storage compartment
photo 3.jpg
With storage compartment open
photo 6.jpg
Lighted deck
photo 2-1.jpg
Foot switch for Power Pole
photo 1-1.jpg
Hummingbird 998C install
led lights part oneIMG_0085.jpgIMG_0086.jpg
Very nice work!
how much did you pay for your boat
Ross
2010 Xpress HD 20SCA
2010 Yamaha 150 HPDI
Looks like a great job on the bracket, very sturdy. But shouldn't the transducer be level and turned around?
2013 X24 Catfish, Yamaha 250 SHO