-
Prop shaft play
I have a 1999 Johnson 225 that rolled back into a post when I unhooked it the motor was up on the motor toter and hit the prop hub.
It was not a hard impact but it was the full weight of a 21' boat.
Now there is about 1/8 to 1/4 inch movement in and out of the shaft and I've got a knock coming from the foot.
Any ideas what is causing this !
-
Assuming you have run the motor after this impact, does it shift through the gears as it did before ? Have you checked the propshaft for being bent ?
-
The motor still shifts fine there doesn't seem to be any vibration in the motor just a knocking of clicking sound from the lower unit under load
-
Remove the bottom drain plug and look for pieces of metal on the magnet, if found, you have issues with the gears inside. The noises you hear are a sign of gear teeth breakage from the pinion gear.