MY wife bought me new seats with the coin box for my 04 520. As you can see there's a gap behind the seats. I'm assuming that gap should be there because of the metal plate that is in the middle runs behind both seats a little. I just wanted to make sure that the seats would suck up and fill in that gap once I put screws in it.
Brandon
04 Ranger 520
Put the screws in and see.
2017 Ranger Z520c "Blackout Edition"
2017 Mercury Optimax ProXS 250
HB Solix 12 G3 MSI+, Solix 12 G2 MSI+, Solix G2 MDI+, Solix 12 2d/gps, Ultrex Mega360, Mega Live
NRA Life Member
-Be sober, be vigilant; because your adversary the devil, as a roaring lion, walketh about, seeking whom he may devour-
It will draw up tight. You may have to move the screw locations. The original holes might not hold. Hand tighten with a #3 screwdriver to avoid blowing out the glass.
Thanks
Brandon
04 Ranger 520
It should draw up when you tighten the screws. Make sure it is against the metal tabs on the bottom.
Lets see some pics when you are all done.
Reply With Quote