Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Mar 2012
    Location
    Arlington, TX
    Posts
    56

    2014 Z9 front deck button panel not working

    I have a 2014 Z9 and the front console Button panel will light up when you turn on the master switch but none of the buttons will work. I have checked all of the connections and fuses. I had one blown fuse and replaced, but is there some type of RESET you need to do?

    Any help would be greatly appreciated. My front Trim and Tilt isn't working an that is what I really miss.

  2. Nitro Boats Moderator BMCD's Avatar
    Join Date
    Jun 2004
    Location
    Brookeland, Texas
    Posts
    17,466
    #2
    Is it just a the trim function not working? Doubt there is a reset function, but if there is I would imagine it starts with disconnecting the batt.
    Bryan McDonough
    2023 Nitro Z21 XL
    Nitro Team

  3. Member
    Join Date
    Mar 2012
    Location
    Arlington, TX
    Posts
    56
    #3
    Nothing works on the panel at bow of boat.

  4. Member
    Join Date
    Jun 2013
    Location
    cny
    Posts
    298
    #4
    Maybe loose wires underneath .......take off and tighten all connections.....check fuse panel .....most likely under dash.....at that point faulty switch panel ?

  5. Member
    Join Date
    Aug 2013
    Location
    okeechobee,fl
    Posts
    424
    #5
    I reset my horn switch.hope down the trim up front and then turn key on them turn off key and let go trim switch upfront then try it.worked on my z9 cash panel

  6. Member
    Join Date
    Aug 2013
    Location
    okeechobee,fl
    Posts
    424
    #6
    Cash panel