Hey so I got a few questions on performance with this prop on the 150 optimax motor.
with a fully loaded boat (ranger reata 180vs)
I know my motor is too deep as Ranger recommends motor mounted on the 3rd hole and its currently at the 2nd from the top making it 6" to pad height but I feel like my holeshot is not where it should be.
I know I do have the issue of a larger pad to prop heigh which I will correct this winter but curious...
do most boats require WOT throttle to get on plane properly without causing a plowing effect. \
What do you guys have your PVS set at? currently my prop has all Large PVS plugs and i've been debating on removing 1 at a time to see if I can it coming out of the hole easier without needing to whack the throttle wide open.
I know I got lots of room for improvement seeing my motor is maxing out at roughly 51mph GPS at 5100 RPM fully trimmed up when its optimal peak rpm is 5500 and max recommended 5750.
Thanks!