Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Aug 2015
    Location
    St.Augustine, FL
    Posts
    55

    eztroll install on gambler

    anyone install trolling motor tray on older gambler? do not have well in my 1995 209. eztroll says unit is about 7" deep but looking way bottom of gambler made looks like comes up sharply. do not want to cut in my deck then go ut uh!!!

  2. Member
    Join Date
    Mar 2012
    Location
    Blanchester Ohio
    Posts
    1,146
    #2
    I have a comfort troll in mine I think that’s the brand you will have to cut a aluminum floor brace out most likely
    Lowrance Pro-Staff
    Picasso Outdoors
    PowerTeam Lures
    Red Dirt Baits
    Boing Lures
    E Custom Baits
    Full Throttle Tackle

  3. Member
    Join Date
    Oct 2017
    Location
    Lake of the Ozarks
    Posts
    114
    #3
    yes there is an aluminum brace you will cut thru and possoibly 4 wires wire tyied to it as well. Im 300lbs and have no problems on mine having cut the brace. You might want to look at a different tray thats not as deep, it will fit but with my tour edition MG pedal i found to go heel down to back up its uncomfortably deep in tray, I put 2x6 board under pedal and its perfect now. The do make shallower trays