-
Fulton F2 winch
Switching my winch to a Fulton F2 winch and can’t get the bolts to tighten. I can’t believe this should be so hard. An6 tips on what I may be doing wrong.?
-
Member
A picture and some more info.
I'm not sure what we are dealing with.
-
Better Lucky Than Good!
When I put my Fulton F2 on it had 2 spots where the head of the bolt would fall into a hexagonal drop inside the winch body, as long as I held the top of the bolt down that space kept the head of the bolt in place and tight. I used a screwdriver to put some downward pressure on the top of the bolt while I tightened the 2 nuts w lock washers.
Hope this helps.
2006 Triton SP-185, 2006 Evinrude Etec 90, PowerTech NRS3, Garmin Echomap Plus 73CV & 93SV
-
Better Lucky Than Good!
If yours just has the slot, hold the top of the mounting bolt with a wrench and use a socket on the nut and lockwasher.
2006 Triton SP-185, 2006 Evinrude Etec 90, PowerTech NRS3, Garmin Echomap Plus 73CV & 93SV
-
You're going to love that F2. The low gear is awesome.