Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Sep 2008
    Location
    Kimberling City
    Posts
    2,310

    Ranger seats and water?

    Without going into all the details need to know if I'm fighting a losing battle. Seats out of a 620vs were under water for 48 hours. It has been more than a week and I still cannot get all the water out of them. Do I need to turn this into the insurance company or continue to try and dry out? If all the water does find its way out will the seats/foam be ok?

  2. Member
    Join Date
    Dec 2017
    Location
    Cambridge IL.
    Posts
    1,414
    #2
    Call your insurance and get documentation. You may have to pull them and use drying methods. You may have more issues that will result from water damage. I would get it to a reputable shop for evaluation. If repairs are required get your insurance involved. Good luck.

  3. Member crank68's Avatar
    Join Date
    Mar 2011
    Location
    Kenly, NC
    Posts
    17,437
    #3
    The foam “should” be inside plastic butttt....I would defiantly call the Ins company. I redo a lot of seats that have plastic but it’ll be torn inside the seats or it’ll have some sorta issue that’ll make the seats hold water.
    BULLET 20 XRD/250 Merc Sport XS
    www.ncboatguy.com

  4. Member
    Join Date
    Sep 2008
    Location
    Kimberling City
    Posts
    2,310
    #4
    It seems that no matter what I do I can still hear water in them as well as some coming out. Insurance is aware.

  5. Moderator
    Join Date
    Jun 2004
    Location
    Miami
    Posts
    9,303
    #5
    do it right and pull the skins off, get them dried correct.
    That is not hard to do