Yamaha complete build from Hydrotech marine, phase 2kit, 284hp at 6100rpms. Rev limiter moved to 6150. Ranger Z520, 10in slidemaster JP, played around with the jack plate and have it set 2 3/4 inches prop to pad. Turning a 25p T1 5900 rpms. Great hole shot, good performance overall but wondering if I can get some more RPMS and top end. GPS yesterday ran 71 with a full tournament load. I can get some more RPMs out of it by trimming but it really kites the bow and puts the nose too far out of the water and I start to loose speed. Should I keep raising my JP? Water pressure right around 17-15 at WOT. If I was pushing 6100rpms I would change over to a 27p T1. Water temp was 79-80 yesterday when I ran it. I have just completed the 10hours of break in so I know it will perform a little better once I get some more time on it. Thoughts?