So at this point I've not gained 1 mph over my 250 pro xs
What kind of props are u guys running on your new 4 strokes
25 fury 75.5 5850 rpm
26 promax 75 5700 rpm
27 tempest 77 5550 rpm
28 bravo 76 5600 rpm
27 turbo ot4 74.5 5700 rpm
25 bravo 71 6200 rpm
These are all loaded speeds with10ft blades and atlas jack plate
Maybe try some smaller pitched props? 23 or 24 fury?
Have you had it checked to make sure it's getting wot? I know some have needed the hot foot adjusted.
Yes had it at the shop today
That just doesn't seem right. My 250 4s will turn a 24p fury to 6200 at 75 loaded and 80+ water temps. I was actually thinking of getting a 25 or 26 at some point.
My buddy just bought a falcon 215 with a 300 also it will out run my boat so u guys can understand my frustration
is your motor a 300 pro xs or 300r? also what size jack plate?
300 pro xs
10 in atlas
how many hours are on your motor? is it broke in...… how high are you running the motor?
there is a 921 phx with 12 bobs hydro and 300r motor that is broke in and running high on jack plate with 27 fury 3 blade or 26...… no back seat no front seat and passenger side console removed and 3/4 tank of fuel running 81 and change and bumping 82 some...no pwr poles not sure of battery's agm or lithium... I have no knowledge of the difference between 300r and 300 pro xs…. but I would agree with you some thing is off....
Who's rig is that 921? I think I have a clueOriginally Posted by wall
Around 3in but ive tried it all over. The motor has 21 hrs now I just ordered 2in spacers for the jackp so will see if that works
Kry29 you are very close to Beaumont so I believe you know...…I am unsure if he would want his name on the internet....but you and I both know the boat and motor came from Jordan Marine....
cody721 please keep us updated
Reply With Quote