So i have a level 1 mercmonitor and just purchased a Lowrance elite 7 Ti. If i want to get my 250 ProXs info on my Lowrance unit all i will need is a N2000 starter kit then plug the mercmonitor into the back bone
So i have a level 1 mercmonitor and just purchased a Lowrance elite 7 Ti. If i want to get my 250 ProXs info on my Lowrance unit all i will need is a N2000 starter kit then plug the mercmonitor into the back bone
2000 520vx Ranger
250 PRO XS
SERIAL#2B115788/ 25P Fury 4/ 25P Fury 3 blade
How old is your Elite7? Initially the Elite series did not have NMEA2000 nor the capability to display engine data. Newer versions have both but I do not know when that switched over.
What you will need is a T and drop cord for the Elite7 (and one each for other Lowrance units), a T for the MM (it already has a drop cord), terminating resistors (2) and a switch to kill the network when sitting at home. The MM can supply the power to the network.
USN Retired
2020 Basscat Caracal
2020 Mercury 225 ProXS 4s
Last edited by fishfarm; 09-12-2018 at 09:13 PM.
2000 520vx Ranger
250 PRO XS
SERIAL#2B115788/ 25P Fury 4/ 25P Fury 3 blade
IF your Elite 7 supports engine-data on NMEA-2000, a Starter Kit will get the job done.
In the past, the Elite series have NOT supported engine functions (it could see the MercMonitor, but would NOT communicate with it). Have not, to date, found ONE Elite series that would (yours might be the first).
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
He has the Ti unit and it does have NMEA and will show engine data.
Attachment 339336
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
2000 520vx Ranger
250 PRO XS
SERIAL#2B115788/ 25P Fury 4/ 25P Fury 3 blade