Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Feb 2021
    Location
    Bordentown, NJ
    Posts
    84

    Boarding ladder ideas

    Any boarding ladder ideas for a ‘99 TR19 ?
    not sure an e-ladder situation will work with an older nonfit partner.
    Eventually I’ll be adding Talons so that really messes things up.
    Can a ladder be added to Talon brackets if I keep it tight to the engine and not hang it way out to the side ?

  2. Member
    Join Date
    Feb 2021
    Location
    Bordentown, NJ
    Posts
    84
    #2
    Come on now, no one has put a ladder on an older TR with Talons ……
    somebody must have done one or seen one.

  3. Member
    Join Date
    Jun 2010
    Location
    Seabrook, TX
    Posts
    1,212
    #3
    I put a Twist Step ladder on my old TR186. I attached it to the bolts that attached the engine to my Jackplate. I had enough threads showing that I was able to put install a washer then the step then another locknut. It was solid and actually angled the step a little so it was easier to use. I had PowerPoles instead of Talons. It was a tight squeeze to get back in the boat with the Poles up but it was doable. If I put the Poles down, it was no problem at all getting back in. I know it will be a little different with Talons though.
    Have a Blessed Day,
    Mike

  4. HYDRA SPORT LS205 225HO JER-1 BIG BASS's Avatar
    Join Date
    Mar 2011
    Location
    Proctorville Ohio
    Posts
    3,517
    #4
    Anyone have a way to attach a ladder to talons,
    It’s a 1998 hydro sport LS205, 10 inch jack plate with a 225 ho