Looking for some good prop info. Would a 25M work for me or do I need a 25t1 ? Thanks
zx202c skeeter
Looking for some good prop info. Would a 25M work for me or do I need a 25t1 ? Thanks
zx202c skeeter
Someone surely can help or has dealt with this before? I’ve been told anything from 27 to 23 prop
I hve a 2000 202 and run a powertech tro4 and it runs great!
I have a 225 though
Anyone here had a 200 hp vmax ???
The M props have thinner blades than the T series props. They are really not recommended for high HP engines like the 225 up to 300 but should work fine on your 200 and probably would be a little faster too if all other things are equal. What type of prop and pitch are you running now and what are you seeing as far as RPMs, top speed, and holeshot?
Thanks
Good M runs very good on that motor, but you have to take into consideration the boat it's on.
Would it be ok on a 202c
Id say a 25p t1 would be your best bet. But not easy to find.
I have 2003 200 hp hpdi with 25m prop. 1999 SX 202 C. Slow out of hole. Gonna try hydrofoil but it is 2.6 and not a 3.1
Will know more over weekend
25M work great until they sling. A tempest+ 26 that’s been balanced works well too.
Larry Eby, 2004 ChampioN 188 Elite/2003 200 Hp Vmax OX66
"Romans 10:9"
I run a 25p Tempest+. Tried a 26p, but it was a bit much. I have a 25M but liked the Tempest better. 2000 ZX202C with 200hp.
On the three different 202c with ox66 they all performed very well with 25-27M or 25-26 Tempest. Depending on load.