-
Data problem
Ok so I am new to rays. Just a bass cat with axioms. He just did a update on them. Now they are stuck in data manager search mode. I can’t do anything with them. Any idea
-
Honda / Raymarine Moderator
Think you just need to select a data master.
-
Ok tried that. Now that unit works and the rest just keep restarting.
-
This is what I would do. First, make sure that you are running off batteries only and don't have your charger hooked up - in case the charger is creating some weird voltage. Disconnect the NMEA cables and Raynet cables from the units so that they are not networked together. If you have any SD cards (map cards etc) in the card slot remove them too.
Now with no SD cards and nothing networked together see if they will boot correctly. If they do, start by putting the cards back in - make sure they boot correctly. Then start networking them one at a time. That is going to be the easiest way to begin to isolate the problem.
-
Honda / Raymarine Moderator
Also make sure you have the latest software on all of them.
Reply With Quote