Results 1 to 2 of 2
  1. #1
    Member JoePA's Avatar
    Join Date
    Jan 2005
    Location
    Tamaqua
    Posts
    5,529

    1988 Mariner 60hp link and Sync

    I picked up a 1988 Mariner 60hp yesterday and It has some issues. I noticed that the adjusters were all loose for the timing and throttle stops so I need to adjust those. Also what is a base setting for the idle air mixture screws? I set them at 1.5 turns out as a base line. Last question, the oil injection system on this engine looks like it mixes the oil with the gas then it feeds the engine. Is this a reliable system?

    Any advice on how I can set up the timing on this engine and set the carbs up?


    Thank you!
    Joe Galada - Tamaqua, PA
    2004 Ranger 521VX - Yamaha 250 SHO

  2. Member
    Join Date
    Jun 2013
    Location
    LONGVIEW TEXAS
    Posts
    13,938
    #2
    service manual would be best,take that auto blend off and just premix in tank they junk, might wnna go 2 on carb to start
    .................................................. ...the scariest thing in life is the unknown ...................................