Results 1 to 6 of 6
  1. #1
    Moderator JerryT's Avatar
    Join Date
    May 2004
    Location
    90210
    Posts
    21,218

    XTM 9 wide DI 20 ?for expert

    So I fish shallow a lot so I am constantly bumping my transducer .. broke it repaired it and broke it again..and again

    Do any of you know how much of the bottom surface is actually used for reading ? I plan on making a metal wrap around protector/ mount that would cover some of the bottom but need it exposed enough to read of course .. I notice you can almost see an inside puck ?? Anyone that can shoot me in a direction on this ??

    picture upload url

  2. Member Wayne P.'s Avatar
    Join Date
    Jan 2010
    Location
    Charlottesville, VA
    Posts
    30,311
    #2
    It has a round disc crystal for 2D sonar on the end by your hand. Then from there to the other end down the center there is a bar shaped crystal for Down Imaging.

    Two of these plus some side bracing may work:

    https://www.transducershieldandsaver...r-transducers/
    Wayne Purdum
    Charlottesville, Va.
    Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
    SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
    MEGA LIVE, LIVE TL

  3. Moderator JerryT's Avatar
    Join Date
    May 2004
    Location
    90210
    Posts
    21,218
    #3
    Thank you Sir !! Just the info I needed.. think I’m going to try making something ... just because I like making stuff

  4. Member
    Join Date
    May 2012
    Location
    Harrison AR
    Posts
    10,086
    #4
    Get a Transducer Shield and Saver for the front AND back.


  5. Member
    Join Date
    Jun 2004
    Location
    Bull Shoals, AR
    Posts
    9,936
    #5
    Quote Originally Posted by Cestratton View Post
    Get a Transducer Shield and Saver for the front AND back.

    Will those work with a us2 xdcr built in to the trolling motor?

  6. #6
    Only one will work. You'll have issues with the other hitting the shaft of the motor.