I'm looking for the flat piece that sticks out in front of the Ultrex where the trolling motor slides up on. Mine is a 80lb. Where can you order that piece?
I'm looking for the flat piece that sticks out in front of the Ultrex where the trolling motor slides up on. Mine is a 80lb. Where can you order that piece?
2021 Skeeter ZX225
2021 Yamaha SHO 225 VF225LA
Good question. I could use one as well.
2021 Skeeter ZX225
2021 Yamaha SHO 225 VF225LA
Here is a link https://motors.johnsonoutdoors.com/P...382.1526584116
2021 Skeeter ZX225
2021 Yamaha SHO 225 VF225LA
Don't worry Ma'am....
I'm only here for the Bass.
2021 Skeeter ZX225
2021 Yamaha SHO 225 VF225LA
Thanks
I think you're talking about the ramp. We have them in stock.
BBC Sponsor since 2006: (870) 773-3474
Mon - Thrs 8am - 5pm Central
Friday 8am-12pm
Garmin Certified Dealer and Installers: Call us for all your Garmin Electronics needs!
ASC for: Garmin, Lowrance, Minnkota, Humminbird, and Powerpole.
[SIGPIC] http://www.jonestrollingmotor.com
[/SIGPIC]
Well, I have my second new 2018 Skeeter trailer that's a POS in my opinion. It's very hard to get the trailer in the water at the correct depth for the boat to load. Yesterday by myself I had the trailer in the water to far and wham, the bow hit the roller and damaged that part. Luckily only that part of the trolling motor this time. It bent the heck out of that piece of plastic. Still usable but it's cheap so ordered a new piece.
When I first got the boat and trailer every time you loaded the boat, the boat would slide to the left and miss the roller if you didn't have help or actually steered the boat somehow. I hit the roller once then and damaged the fiberglass. Skeeter replaced the trailer because the bunk supports were off by an inch on the right side causing the problem. The new trailer is still not right either.
2021 Skeeter ZX225
2021 Yamaha SHO 225 VF225LA