Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    May 2018
    Location
    Tell city indiana
    Posts
    5

    Hydro tec throttle body

    I bought my Skeeter used, 2003 sx200. I was told it had 250 “parts” on it and not much more info. I found a HT part number stamped on the heads but not much more. It is a 200ox66. Turns a 27 t1 prop 1 inch below the pad. Have 36 volt motorguide, fully loaded I’ve seen 74.6 before it starts to walk more then I want to deal with. Is there a way to tell or a part number stamped on HT throttle body? If it is stock would the big bore, spacer and exhaust tuner make a difference? It has a 6 inch jack plate I feel needs to be changed to 10, open to suggestions

  2. Member
    Join Date
    Mar 2006
    Location
    Maine
    Posts
    3,368
    #2
    It seems like you need a little more seat time before you start adding more HP to it. You aren't even seeing its full potential now. I would work on seat time and go from there.