Transducer install on ultrex

[senkizer]

Guys,
Does anyone have pictures of their transducer install on thier ultrex? I'll be putting my new ultrex on and want to eliminate interference on my hds 12 as much as possible. Thanks for the help.

[duncankopprichardson]

US2?

[fishin couillon]

Well......what transducer????

I have a Garmin ducer on there now with very little interference.....

I removed my Totalscan ducer before i could use it on the Ultrex.....

[senkizer]

Sorry for the lack of details. I'm installing the HDI transducer. I'm interested as to how everyone ran their cable up the shaft and down the base or did you run the cable down the power cord? With my Fortrex I had to run the transducer cable down the base instead of the power cable, because I was getting too much interference. Thanks for the help guys.

[fishin couillon]

With my garmin ducers, i ran the cables on the power cord....the thing is you just never know if/when you will get interference.....best way is along the base.....

Here is my setup...comes out at base of foot control....

[senkizer]

That looks awesome. Thank you. Do you get interference running the transducer cable down the cable to the foot pedal? That was the issue with my fortrex. Every time I hit the pedal button it would send lines down my graph. Thanks again.

[fishin couillon]

Very little interference....figured i'd try it and if it didnt work then i'd re-route the cables but so far, so good....again, I'm using 2 Garmin transducers....

[SBailey]

Where did you get the phoenix TM cable cover?

[fishin couillon]

Where did you get the phoenix TM cable cover?

Found it thru BBC.....he made them and put logos if wanted....he has since sold the product to TH Marine which they showed at Icast last month.....not sure when THM will start selling them.

Here is the link..... https://thmarinesupplies.com/product...ganizer-sleeve