Repower cost

[JoePA]

So I've been tossing the use around of repowering to the new Merc 4 stroke 250 Pro XS. Since I'm currently running an Evinrude, what additional costs will be part of the repower? Controls, guages...??

[EuropeanAM]

Control, Cables, Keyswitch Harness, Instruments, Propeller, Fuel Line (with no extra filter), and likely a steering cylinder.

Smartcraft Instrument would be something wise to ocnsider in the process as well.

Talk with your local Mercury Dealer- and plan ahead with ordering as it takes around 7 months (currently).

[stealthperf]

So about 30 grand for a 300.... Damn, I think I'm out..

[stealthperf]

Sorry I missed the part where you were starting with an Evinrude... That'll cost more... I'm going merc to merc..Maybe it won't be so bad......?

[21xTriton05]

-Engine is +/-17k (DTS clean power harness & Battery cables come with the 20 in Pro XS only)
-Control $345
-Cables $100
-20 ft Boat harness $225. A 25 if needed would be around $245
-Smart craft, $425 or buy a tach harness to use all your analog gauges for $60
-1.25 Hub kit $180
-Prop $529 (lots of good used props available that are cheaper)
-Local taxes if you're buying in state
-Labor would likely be around $800 or so switching out everything

[EuropeanAM]

-Engine is +/-17k (DTS harness & Battery cables come with the 20 in Pro XS)
-Control $345
-Cables $100
-20 ft Boat harness $225. A 25 if needed would be around $245
-Smart craft, $425 or buy a tach harness to use all your analog gauges for $60
-1.25 Hub kit $180
-Prop $529 (lots of good used props available that are cheaper)
-Local taxes if you're buying in state
-Labor would likely be around $800 or so switching out everything

Approximately, except for the missing steering and some incompatible (analog) instruments.

Don't forget the Sept. 1 Price Increases.

Just to clarify,

DTS

harness does NOT come with ProXS 20" engine models. A "Clean Power" harness comes with them, however.

[21xTriton05]

Sorry, ^^ clean power harness** edited.